Tork Craft | Annular Hole Cutter HSS 45 X 55mm Broach Slugger Bit Cordless_Pencil Grinder The new Tormek Diamond Wheels

The new Tormek Diamond Wheels offer an exceptional durability plus the ability to sharpen on the side as well as the periphery

rigid abrasive sponge

Increase your lathe speed to around 1500 rpm for pens and burnish hard using the wet spot

tilt angle)

Tork Craft | Annular Hole Cutter HSS 45 X 55mm Broach Slugger Bit Cordless_Pencil Grinder The new Tormek Diamond WheelsAnnular Hole Cutter HSS 45 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these