Otto Frei 4-1/2" Bent Nose Prong Pulling Pliers-German Made Dies & Molds 231 – Busch Carbide Circular

231 – Busch Carbide Circular Saw Fig 231F

protecting both the tool and the workpiece

90 mm to 8

or it can be permanently mounted using self-supplied screws through three holes in the mounting base

Otto Frei 4-1/2" Bent Nose Prong Pulling Pliers-German Made Dies & Molds 231 – Busch Carbide CircularThe Otto Frei 4 1 2" Bent Nose Prong Pulling Pliers are a modified chain nose design engineered specifically for controlled prong lifting. The lower jaw is grooved to cradle and support the prong during the lift, while the upper jaw is slightly cut back and hooked to catch securely under the tip of the prong as it rests against the stone. This geometry gives the setter precise, repeatable leverage with reduced risk of marring the prong or stone.