Tork Craft | Annular Hole Cutter HSS 33 X 55mm Broach Slugger Bit Type_Pipe Clamps Apply a thin maintenance coat

Apply a thin maintenance coat of Osmo UV Protection Oil

600     Net weight 4

The Einhell TH-HA 2000/1 hot air gun serves up the temperature you need on all jobs in the home

Casing diameter is 58mm

Tork Craft | Annular Hole Cutter HSS 33 X 55mm Broach Slugger Bit Type_Pipe Clamps Apply a thin maintenance coatAnnular Hole Cutter HSS 33 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these