Motor Brushes & Springs, Set of 2 ( Fits 221, 222, 201, 15-91 & most 401's) hull These are often cracked or

These are often cracked or chipped as Featherweight machines were placed in their cases when the terminal would get caught on the right side of the case

so there is no lip on the surface of the bobbin

The underbraider guides the braid through while the quilter foot (without the bar) feeds and sews on the backside of the fabric - making the braid appear as if it is "floating" on the front surface

How to Adjust & Raise and Lower the Feed Dogs in Throat Plate Slots

Motor Brushes & Springs, Set of 2 ( Fits 221, 222, 201, 15-91 & most 401's) hull These are often cracked orWatch new video tutorial and look for the FWS on those motor brushes! When replacing the carbon motor brushes, replace both the top and bottom motor brush for motor balance. Also, be extra careful when unscrewing the motor cap screws if they are the original Bakelite style. Use a proper sized screwdriver and carefully turn the screwdriver without applying too much pressure or force, because they can crack and break easily. Of course, should this