SMC CRBU2 Series Free Installation Rotary Actuator Vane TypeCRB2BS15-180SEZ Bore Size_001^4mm Application Practical fold out holder

Application Practical fold out holder for hex screws in the workplace or on the job

Specification item model symbol Specification information built-in magnet - No built-in magnet installation support B Through hole (standard) form - pneumatic type tube inner diameter 63 Bore size 63mm Types of port screws - Rc/M screw cylinder stroke 40 cylinder stroke 40mm body options - Standard (rod end female thread) Auto switch mounting groove Z ø12-ø25 2 sides/ø32-ø100 4 sides auto switch - Without auto switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

due to contact seal   Speed capability  Good Good Limited by contact seals  Grease-sealing effectiveness  Good Better than ZZ type  Slightly better than VV type  Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments)  Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing)   Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C   Note (1) The above temperature range applies to standard bearings

Compact Cylinder Type Standard Bore Diameter 40 mm Stroke 50 mm Piston Action Double-Acting Cylinder Series CQ2

SMC CRBU2 Series Free Installation Rotary Actuator Vane TypeCRB2BS15-180SEZ Bore Size_001^4mm Application Practical fold out holderOVERVIEW The starting position can be changed arbitrarily depending on the installation situation Light weight reduced by 12% 6 types can be installed directly Adjustable angle can be adjusted with an angle adjuster Auto switch mounting position can be freely set Auto switch attached (CDRBU2 series : CDRBU2 Z, CDRBU2WU Z) Configuration Options 1 With auto switch (With auto switch unit and built in magnet) * Refer to page 99 when the auto switch unit