Spraytech Standard Pump Controller Additive Applicator Then using the up arrow

Then using the up arrow increase cal until the pump starts to run

Precisely controls pressure from 0 to 100 PSI when broadcast or spot spraying

Powered by a 20 litre per minute 12 volt pump fitted with chemical resistant viton valves and a santoprene diaphragm

pinch-to-zoom Power: using vehicle ignition

Spraytech Standard Pump Controller Additive Applicator Then using the up arrowSpraytech Standard Pump ControllerThis unit allows the operator a simple method of controlling 12V pumps of up to 10 amps. Up and down buttons vary speed output and there is also a built in on off button. Set Up The Controller will need the calibration to be set before it will drive the pump Please ensure on the pump is connected to the Controller and that all valves are open Set a flow rate then Press the enter and up buttons together ( 2 outside